Description:
OPGW provides ground wire protection for overheadpower lines as well as fiber optic cable for telecommunication network with high performance. By combining these functions inone cable, OPGW considerably reduces loads on the towers and is
optimized for superior mechanical, electrical, and data transmission properties to fulfill all overhead line design requirements.
Feature / Benefit:
Up to 144 fibers, 48 fibers
Laser welded, hermetically sealed stainless steel tubes provide mechanical and thermal protection for optical fiber
High tensile load, long span, high crush resistance
Excellent resistance to moisture and hydrogen ingress handling
Fiber bundles for more than 12 fibers to quick and easy identification
Minimized additional loads due to small diameter and lightweight with the high strength aramid yarns
Anti-rotational devices usually not required for installation
Custom cable designs available
Meets or exceeds test criteria specified in IEEE 1138, the recognized standard for OPGW
Construction data：
Characteristics
|
Fiber Count |
|
Unit |
24 |
36 |
48 |
72 |
|
Number of tubes Fibers/tube |
- |
1x24 |
1x36 |
1x48 |
1x72 |
|
Nominal outer diameter |
mm |
13.98 |
17.04 |
18.32 |
17.04 |
|
Nominal cable weight |
kg/km |
465 |
687 |
793 |
649 |
|
Metallic section |
mm2 |
111 |
166 |
191 |
157 |
|
Inner layer |
mm |
Central Φ2.82 AS,Φ2.75 (1ST + 5AS) |
Central Φ3.44 AS,Φ3.35 (1ST + 5AS) |
Central Φ3.7 AS,Φ3.60 (1ST + 5AS) |
Central Φ3.7 AS,Φ3.35 (1ST + 5AS) |
|
Outer layer |
mm |
Φ2.83 12AW |
Φ3.45 12AW |
Φ3.71 12AW |
Φ3.45 12AW |
|
Breaking load |
KN |
51 |
76 |
88 |
66 |
|
Thermal coefficient |
10-6/K |
18 |
18 |
18 |
18 |
|
D.C. resistance/20℃ |
Ohm/km |
0.33 |
0.22 |
0.19 |
0.23 |
|
Short circuit current, 40~200℃ |
KA2S |
100 |
220 |
300 |
200 |
|
Characteristics |
Fiber Count |
|
Unit |
2 ~ 48 |
2 ~ 48 |
|
Protective Layer |
- |
Single |
Dual |
|
Nominal outer diameter |
mm |
10.6 |
17.82 |
|
Nominal cable weight |
kg/km |
411 |
650 |
|
Metallic section |
mm2 |
58 |
145 |
|
Central tube inner layer |
mm |
Central Φ3.6 1ST |
Central Φ3.6 1ST, Φ3.5 6AS |
|
Outer layer |
mm |
Φ3.5 6AS |
Φ3.61 12AW |
|
Breaking load |
KN |
69 |
78 |
|
Thermal coefficient |
10-6/K |
13 |
17 |
|
D.C. resistance/20℃ |
Ohm/km |
1.5 |
0.3 |
|
Short circuit current, 40~200℃ |
KA2S |
2700 |
2700 |
* Tested in accordance with IEC 60794-1
•Fiber and binder colors by IEC60304: Blue/Orange/Green/Brown/Grey/White/Red/Black/Yellow/Violet/Pink/Aqua
